StormTank™

Brentwood's StormTank™ stormwater storage modules are a high-void, strong, affordable alternative to crushed stone, concrete structures, or pipe chambers for sub-surface stormwater detention or infiltration basins.

 

Brentwood StormTank modules offer the largest void space of any underground stormwater storage units currently on the market (97%), and are load rated for use under parking lots, athletic fields, parks, etc. (Designed to exceed HS-25 loading criteria).

 

The entire StormTank storage system is built on-site from top/bottom platens and side Panels made of rugged, lightweight polypropylene and 2-3/8" diameter PVC structural columns. Combinations of these three components create all the module configurations needed for a fully-functioning underground system. To minimize shipping costs, the StormTank components are delivered unassembled, but on-site assembly is a snap! No special equipment, tools, or bonding agents are needed to assemble or install the modules. All components easily attach with a secure concentric pressure fit.

 

The open tops/bottoms and sides of the modules makes flushing and cleaning easy ... a great advantage over storage systems where access is limited.

 

Brentwood StormTank Modules have undergone real-life load testing at the Queen's University GeoEngineering Centre. A single-axle load exceeding 83,000 lbs. was successfully applied to the installed Brentwood StormTank stormwater system. No comparable stormwater product has ever been tested this extensively.

 

Because of its 97% void space, stackability, and HS-25 strength, a StormTank system offers significant space and cost savings when compared to conventional stormwater storage solutions.

 

MAXIMIZE LAND USE

Because a StormTank system is installed underground, it frees up surface space for uses that would otherwise be unavailable.

 

Unsightly detention ponds are unusable, land-wasting, restricted spaces that can cause insect and pest control problems and high maintenance costs with no corresponding benefits.

 

A StormTank system can bring athletic fields, pavilions, sheds, and other surface-level structures, playgrounds, blacktop areas for sports and/or parking, and other people-friendly, usable greenspace.

 

A StormTank installation requires a much smaller footprint than a crushed rock system with the same amount of stormwater storage capacity. And less space used also means less expense for excavation, geotextile, liner, installation, and backfill.

 

STACKABILITY + VARIABLE COLUMN HEIGHT = MAXIMUM VERSATILITY

StormTank's stackability and variable column height (18"-36") can maximize the use of a site with limited surface area.

 

StormTank observation ports and inlet/outlet connections are ruggedly constructed and specifically designed for use with StormTank stormwater storage modules.

 

 

 

 

 

R. H. Moore & Associates, Inc.

7834 Depot Lane

Tampa, FL  33637

 

P: (813) 988-0200

F: (813) 985-4533

Email: info@rhmooreassociates.com